Freezing system for bodies Ibernsalm
Product details: Ibernsalm Restyling
It has been studied to preserve corpses already placed into the coffin during the vigil and the observation.
It prevents from hygienc-sanitary problems above all during summeror in particular situations of long stop, or in case of critical pathologically deaths, or as a preventive measure before a long distance transport of the corpse.
Thanks to its small sizes and to the practical case provided with wheels, it is very well transported and used, above all in conditions of difficult and uncomfortable access.
The unique technical characteristics of Ibernsalm Restyling allow a normal use with the opened coffin assuring very good preservation results. The cold air that is produced is spread inside the coffin through two cloth hoses.
In some cases or with particularly adverse climatic-environmental conditions the additional clear cover can be applied in asecond time, that allows to reach even lower temperatures thanks to its insulating function.
The particular aerodynamic design with the inclined upper plane allows to apply changeable images in polish brass, that can be religious or lay figures, in order to personalize the funeral service.
Ibernsalm Restyling is made up of a body-coachwork in expanded polyurethane at high density allowing a proper sturdiness of all the structure, relative lightness and thermic insulation.
The internal part by the evaporator it is furtherlined with insulating material allowing the formation of condensate.
The equipment is made of a ventilated refrigerating system with a power-condensate unity equipped with an high power compressor to assure the preservation of the corpse with the opened coffin.
The evaporating part is provided with two special ventilators introducing and spreading cold air at direct contact with the corpse, thanks even to the activity of the cloth hoses. The equipment functioning is run by aspecial program through an already set timer, that activates the defrosting stages every 4-5 hours of functioning for aperiod of about 12-15 minutes, during which the equipment does not work and an electrical resistance located insidethe tank starts to work.
Once the operation is finished, the equipment starts automatically again and water coming from the defrosting is collected into a bag that the operator must hook to the proper places in advance.
- Total length mm 2080
- Feet side width mm 680
- Shoulder width mm 760
- Head side width mm 680
- Engine side height mm300
- Height mm 170
- Height with glass surface mm 240
- Weight 55 Kg
- Hermetic compressor: Hp 1/3
- Absorption: W 400
- Volt 220-1-50 Hz
- Refrigerating gas: R404
- Gas content: Kg 0,500
- Thermostat scale: +30°C/-30°C
- Minimum temperature: -5°C/-8°C (to use with minimum temperature see the rules in force).
-CEAIB01 - wood finish
-CEAIB02 - briar root